1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again

Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.

Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.

Team MrMC.

testing MrMC 3.0.9

Old TestFlight threads
Locked
User avatar
davilla
Team MrMC
Posts: 4377
Joined: 26 Oct 2015, 17:01

Re: testing MrMC 3.0.9

Post by davilla »

rohitrs7 wrote: 29 Jun 2017, 14:55 Does this have HEVC support on TVOS?


Sent from my iPhone using Tapatalk
HEVC is supported by software decode until tvOS 11.0 becomes public. This testflight series moves to tvOS 10.2 as min.
Top
rohitrs7
Posts: 2
Joined: 29 Jun 2017, 14:55

Re: testing MrMC 3.0.9

Post by rohitrs7 »

Noted. Thanks.


Sent from my iPhone using Tapatalk
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: testing MrMC 3.0.9

Post by cosmoxl »

So, I'm not a traktv user so not testing that. I figured I'd abuse AVF a little bit.

So far I see a lot of good out of it.

The levels output are correct for my TV even though no correction is possible (as Davilla said, it's more direct to display)
The picture is very good, on most videos nice and smooth cadence
CPU usage is about the same as VTB

Not good is

I had some trouble skipping ahead with AVF, but VTB was fine.
On some videos it seems it can't find the right cadence so things looks choppy as if CPU is overloaded, but it's not.
AVF doesn't like h264 transcoded by Plex. Screen is blank but audio and subtitles come through. :)
Last edited by cosmoxl on 30 Jun 2017, 15:01, edited 1 time in total.
Top
User avatar
timstephens24
Posts: 894
Joined: 09 Dec 2015, 22:43

Re: testing MrMC 3.0.9

Post by timstephens24 »

I turned on the AVFoundation hardware acceleration and turned off VideoToolBox, and then played my Blu-Ray rip of Deadpool and all I got was a black screen.

https://pastebin.com/b1zDu5pi
Top
User avatar
timstephens24
Posts: 894
Joined: 09 Dec 2015, 22:43

Re: testing MrMC 3.0.9

Post by timstephens24 »

If I long press and mark something as watched in Trakt it works great. If it's something I've already watched it'll increment the play count, and if not it'll mark it as watched. When I'm actually playing something and jump to close to the end, let it play for a little bit, and then don't let it get all the way to end but still close enough for it to mark it watched in MrMC (and in Plex) it doesn't mark it watched in Trakt.

https://pastebin.com/70HyHFEK
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: testing MrMC 3.0.9

Post by cosmoxl »

timstephens24 wrote: 30 Jun 2017, 11:48 I turned on the AVFoundation hardware acceleration and turned off VideoToolBox, and then played my Blu-Ray rip of Deadpool and all I got was a black screen.

https://pastebin.com/b1zDu5pi
yep, same problem as I saw. h264 from Plex and from blu-ray remux are black screen.
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: testing MrMC 3.0.9

Post by cosmoxl »

I'm seeing a frustrating bug that causes MrMC to crash on the apple tv.

I made some changes to my network so I need to edit the configuration of my DVR add-on. Clicking the IP address box which should bring up the box with alphabet and all that causes a crash. The alphabet box doesn't pop up. I've also tried the official kodi remote on iphone and that also crashes.

I don't know if this is from siri remote changes or because I'm on tvOS 11 beta. I can try to get logs later....watching a show right now.
Top
User avatar
amet
Team MrMC
Posts: 3787
Joined: 26 Oct 2015, 16:59
Location: Dubai/Novi Sad

Re: testing MrMC 3.0.9

Post by amet »

cosmoxl wrote: 01 Jul 2017, 14:14 I'm seeing a frustrating bug that causes MrMC to crash on the apple tv.

I made some changes to my network so I need to edit the configuration of my DVR add-on. Clicking the IP address box which should bring up the box with alphabet and all that causes a crash. The alphabet box doesn't pop up. I've also tried the official kodi remote on iphone and that also crashes.

I don't know if this is from siri remote changes or because I'm on tvOS 11 beta. I can try to get logs later....watching a show right now.
tvOS 11 beta is the culprit
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: testing MrMC 3.0.9

Post by cosmoxl »

amet wrote: 01 Jul 2017, 14:15
cosmoxl wrote: 01 Jul 2017, 14:14 I'm seeing a frustrating bug that causes MrMC to crash on the apple tv.

I made some changes to my network so I need to edit the configuration of my DVR add-on. Clicking the IP address box which should bring up the box with alphabet and all that causes a crash. The alphabet box doesn't pop up. I've also tried the official kodi remote on iphone and that also crashes.

I don't know if this is from siri remote changes or because I'm on tvOS 11 beta. I can try to get logs later....watching a show right now.
tvOS 11 beta is the culprit
sounds like you've already run into this bug?
Top
User avatar
amet
Team MrMC
Posts: 3787
Joined: 26 Oct 2015, 16:59
Location: Dubai/Novi Sad

Re: testing MrMC 3.0.9

Post by amet »

cosmoxl wrote: 01 Jul 2017, 14:24
amet wrote: 01 Jul 2017, 14:15
cosmoxl wrote: 01 Jul 2017, 14:14 I'm seeing a frustrating bug that causes MrMC to crash on the apple tv.

I made some changes to my network so I need to edit the configuration of my DVR add-on. Clicking the IP address box which should bring up the box with alphabet and all that causes a crash. The alphabet box doesn't pop up. I've also tried the official kodi remote on iphone and that also crashes.

I don't know if this is from siri remote changes or because I'm on tvOS 11 beta. I can try to get logs later....watching a show right now.
tvOS 11 beta is the culprit
sounds like you've already run into this bug?
viewtopic.php?f=6&t=1226#p8904
Top
Locked

Return to “Read Only”