Testing MrMC 3.8.0 - [Invites Closed]

[cosmoxl]

I disabled VideoToolBox acceleration and only left AVF checked. Still the same results.

debuglog and mediainfo on the mediafile, please.

I saw the above post so I tried it myself. It's using ff-hevc, not AVF.

https://paste2.org/nNbngbbe

Code: Select all

Video 
ID : 1 
Format : HEVC 
Format/Info : High Efficiency Video Coding 
Format profile : Main 10@L4@Main 
Codec ID : V_MPEGH/ISO/HEVC 
Duration : 43 min 44 s 
Bit rate : 5 629 kb/s 
Width : 1 920 pixels 
Height : 1 080 pixels 
Display aspect ratio : 16:9 
Frame rate mode : Constant 
Frame rate : 23.976 (24000/1001) FPS 
Color space : YUV 
Chroma subsampling : 4:2:0 (Type 2) 
Bit depth : 10 bits 
Bits/(Pixel*Frame) : 0.113 
Stream size : 1.72 GiB (90%) 
Default : Yes 
Forced : No 
Color range : Limited 
Color primaries : BT.2020 
Transfer characteristics : PQ 
Matrix coefficients : BT.2020 non-constant 
Mastering display color primaries : Display P3 
Mastering display luminance : min: 0.0020 cd/m2, max: 1000 cd/m2 
Maximum Content Light Level : 808 cd/m2 
Maximum Frame-Average Light Level : 341 cd/m2 

[zonly1]

I disabled VideoToolBox acceleration and only left AVF checked. Still the same results.

debuglog and mediainfo on the mediafile, please.

Debug:
https://pastebin.com/PtLLfhXt
MediaInfo:
https://pastebin.com/kKiHMj7y

[monkbolt]

I'm sorry to get everyone's hopes up with my passthrough bug reports for tvOS 11 but it's broken in the latest build as well, I can't even start a video with an AC3 track with passthrough enabled - here's the log.

full debuglog please, can't tell what's going on when the log is cut.

Sorry, here it is: log

[davilla]

I'm sorry to get everyone's hopes up with my passthrough bug reports for tvOS 11 but it's broken in the latest build as well, I can't even start a video with an AC3 track with passthrough enabled - here's the log.

full debuglog please, can't tell what's going on when the log is cut.

Sorry, here it is: log

found and fixed. thanks for reporting.

[Itzme1234]

I finally got my new Yamaha AVR hooked up. With enable passthrough checked, the Dolby Natures Fury file labelled EAC3ATMOS /8 lights up on my display as “Atmos/PCM”. I’m not sure why it has the slash /PCM.
I get the same display I the Dolby Trailer Leaf.

If I play a DCA/6 file or a AC3/6 file I don’t see DTS or Dolby Digital though, I only see PCM displayed. Should it display DTS or DD? My audio setting in the ATV4k are “Auto,Atmos Available”.

[cosmoxl]

I finally got my new Yamaha AVR hooked up. With enable passthrough checked, the Dolby Natures Fury file labelled EAC3ATMOS /8 lights up on my display as “Atmos/PCM”. I’m not sure why it has the slash /PCM.
I get the same display I the Dolby Trailer Leaf.

If I play a DCA/6 file or a AC3/6 file I don’t see DTS or Dolby Digital though, I only see PCM displayed. Should it display DTS or DD? My audio setting in the ATV4k are “Auto,Atmos Available”.

That's all as it should be. The atmos/PCM is because atmos metadata can be passed via PCM, which is what is happening.

No passthrough is supported by tvOS so that's why DTS or DD doesn't "light up" but only PCM.

[Itzme1234]

I finally got my new Yamaha AVR hooked up. With enable passthrough checked, the Dolby Natures Fury file labelled EAC3ATMOS /8 lights up on my display as “Atmos/PCM”. I’m not sure why it has the slash /PCM.
I get the same display I the Dolby Trailer Leaf.

If I play a DCA/6 file or a AC3/6 file I don’t see DTS or Dolby Digital though, I only see PCM displayed. Should it display DTS or DD? My audio setting in the ATV4k are “Auto,Atmos Available”.

That's all as it should be. The atmos/PCM is because atmos metadata can be passed via PCM, which is what is happening.

No passthrough is supported by tvOS so that's why DTS or DD doesn't "light up" but only PCM.

Thanks for confirming and explaining all of that.

[davilla]

Will the person that supplied 'Batman vs. Superman_cutted.m2ts' send me an email

I'd like to know how you got eac3/atmos (E-AC-3+Atmos / E-AC-3) and dolbyvision (1.0, dvhe.stn@uhd24, BL+RPU) extracted from a blue-ray.

[davilla]

3.8.0 (190203.1722)
core: iOS/tvOS, check color_primaries when deciding SDR/HDR/DolbyVision
core: iOS/tvOS, fix audio sink channel setup when max channels == 2
core: remember last server selected on home
core: add video demuxer color primaries to hints
core: ffmpeg/atmos, only trust eac3/atmos if framesize is 1792
core: fixup, atmos: ec3/atmos for iOS/tvOS
ios/tvos: new icons
android: new icons
plex: clear server type and server UUID on sign-out
emby: ignore folders from emby, they show on home screen

[cosmoxl]

Got the latest.

Nice new entry animation.

The problem of DD+ Atmos files hanging at the end may be fixed. Will continue to test.

The problem of the previously mentioned HDR file not triggering HDR is still there.

https://paste2.org/sd0WyNYY

Code: Select all

21:27:16.113 T:6140981248   DEBUG: FactoryCodec - Video: avf- - Opening
21:27:16.113 T:6140981248   DEBUG: FactoryCodec - Video: avf- - Failed
21:27:16.113 T:6140981248   DEBUG: FactoryCodec - Video:  - Opening
21:27:16.113 T:6140981248  NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: HEVC (High Efficiency Video Coding)
21:27:16.113 T:6140981248   DEBUG: CDVDVideoCodecFFmpeg - open frame threaded with 4 threads
21:27:16.113 T:6140981248 DEBUG: FactoryCodec - Video: ff-hevc - Opened

AVF is failing forcing it to fallback to ff-hevc